About the Design System in Japan – 6

The “Related Design System” in Japan

About the Design System in Japan – 6

The “related design system” in Japan

What is the “related design system”?

 

The “related design system” allows the respective registration of similar designs. It is useful to cover design variations with only a few applications. Under the Japanese design law, without using the “related design system,” a similar design will be rejected based on the prior similar designs.

 

How effective is this system?

 

It enables a clear scope of the respective design right. Clarifying the scope of a design right is, in general, difficult. However, the Japanese “related design system” helps to address this problem and makes such clarification easier and clearer.

 

Example:

(JP Design No. 1390415)

 

This has been registered for a ceiling lamp (partial design, i.e. the portions shown in dotted lines are excluded from the scope of protection).

 

Are the following designs similar to the above design?

The above-mentioned three designs have identically shaped lamp holes. However, depending on the number of these holes, we may get a different overall impression which might lead to the conclusion that the designs are actually dissimilar.

 

However, in Japan there is the possibility to state similarity of the above mentioned designs by registering the following design as the related design with the above-mentioned seven holes design.

< JP Design No. 1412330 >

Doing so, the JP Design No. 1390415 will be considered as the principle design while the JP Design No. 1412330 will be considered as the related design. The JPO will consider these designs “similar” and will therefore accept a so-called “principle-related design” registration.

 

This kind of registration allows us to state that, in this case, that the number of holes has no influence on the scope of the design right. If only the design no. 1390415 were registered, it would be uncertain whether or not the design with three holes or the like are similar to design no. 1390415. However, by using the “principle-related-design-system” the owner will be able to stop a third party from using designs with similar lamps, regardless of the number of the holes.

 

How can we apply for related designs?

 

When filing the applications, one of the applications has to be selected as the principle design while one or more other applications have to be selected as the related design.

 

If the examiner considers pending applications to be similar, he will issue an office action and invite the applicant to use the “principle-related-design-system”. If this happens, it is possible to select one of the applications as the principle design and the other(s) as the related design(s).

 

When can we use the related design system?

 

To use the related design system, you need to file all similar designs at the same time. Also, it is possible to use the related design system if you file a similar design at any time before the design bulletin for the prior similar design application is published.

 

Note:

If the prior design claims postponement of the publication of bulletin; i.e., a “secret design”, the above mentioned design bulletin would not be considered a substantive bulletin which is published after the secret term is expired, but is a formality bulletin which is published without pictures/ drawings soon after the registration.

 

Are there any disadvantages of related designs?

 

Under the related design system, the related design has its own scope of protection similar to the principle design. Therefore, in comparison to a “normal” design right, a related design has no disadvantages concerning its scope of protection.

 

However, related designs have a few of the following disadvantages:

 

  1. Related design(s) can be assigned only together with a principle design. Thus, the owner has to assign the principle design and the related design(s) at the same time.
  2. It is not possible to grant separate licenses to the principle design and the related design(s). Thus, when the owner wishes to grant a license for a principle design, he will need to grant a license for related design(s) as well.
  3. The related designs right expires 20 years after the date of registration of the “principle design”.